D-Link DES-3326SR User Manual page 304

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Select which switch of a switch stack you want to update the
firmware on. This allows the selection of a particular switch
from a switch stack if you have installed the optional stacking
module and have properly interconnected the switches.
Enter the IP address of the TFTP server in the Server IP
Address field.
The TFTP server must be on the same IP subnet as the switch.
Enter the path and the filename to the firmware file on the
TFTP server. Note that in the above example, the firmware file
is in the root directory of the D drive of the TFTP server.
The TFTP server must be running TFTP server software to
perform the file transfer. TFTP server software is a part of many
network management software packages – such as NetSight, or
can be obtained as a separate program.
Click Download to record the IP address of the TFTP server.
Use the Save Settings to enter the address into NV-RAM.
Click Start to initiate the file transfer.
Use Configuration File on Server
To download a configuration file for the switch, click on
the Basic Setup folder and then the Switch Utilities folder
and then the TFTP Services folder and finally click on the
Download Configuration from TFTP Server link:
292