D-Link DES-3326SR User Manual page 221

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Setup the Routing Information Protocol (RIP)
Click on the Setup IP Interfaces link and then click on the
RIP Settings folder. Then click on the RIP State link to open
the following dialog box:
Figure 6 - 44. RIP Status
This window allows RIP to be globally enabled and disabled on
the switch without changing the RIP configuration.
To configure RIP on the switch, highlight Setup RIP from the
RIP Settings folder (under the Layer 3 IP Networking folder).
This will open the following dialog box:
209