D-Link DES-3326SR User Manual page 188

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Configure the following parameters for Port Security:
Parameter Description
Admin State
<Disabled>
Max Learning
Address <1 >
Lock Address
Mode
<Delete On Reset>
Configure Ports
from __ to __
Toggle Admin State to either enable or
disable port security for the port.
Select the maximum
addresses that may be learned for the
port. The port can be restricted to 10
or less MAC addresses that are allowed
for dynamically learned
addresses in the forwarding table.
Select Delete On Timeout to clear
dynamic entries for the ports on
timeout of the Forwarding Data Base
(FDB). Specify Delete On Reset to delete
all FDB entries, including static entries
upon system reset or rebooting.
Use this to specify a consecutively
numbered group of ports on the switch
for configuration.
176
number of
MAC