D-Link DES-3326SR User Manual page 233

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Dead Interval
State
Auth Type
Between 5 and 65535 seconds can
be specified. The Hello Interval,
Dead Interval, Authorization Type,
and Authorization Key should be the
same for all routers on the same
network.
Allows the specification of the length
of time between the receipt of Hello
packets from a neighbor
before the selected area declares that
router down. An interval between 5
and 65535 seconds can be specified.
The Dead Interval must be evenly
divisible by the Hello Interval.
Allows the OSPF interface to be
disabled for the selected
without changing the configuration
for that area.
This field can be toggled between
None, Simple, and MD5 using the
space bar. This allows a choice of
authorization schemes
packets that may be exchanged over
the OSPF routing domain.
specifies no authorization.
uses a simple password to determine
if the packets are from an authorized
OSPF router. When Simple is
selected, the Auth Key:[
allows the entry of a 8 character
password that must be the same as
a password configured on a neighbor
OSPF router. MD5
cryptographic key entered in the
MD5 Key Table Configuration
221
router
area
for OSPF
None
Simple
] field
uses a