Power On - D-Link DES-3326SR User Manual

DES-3326SR Layer 3 Fast Ethernet Switch User's Guide
Figure 2-3. Installing the switch on an equipment rack

Power on

The DES-3326SR switch can be used with AC power supply
100-240 VAC, 50 - 60 Hz. The power switch is located at the
rear of the unit adjacent to the AC power connector and the
system fan. The switch's power supply will adjust to the local
power source automatically and may be turned on without
having any or all LAN segment cables connected.
After the power switch is turned on, the LED indicators should
respond as follows:
•
All LED indicators will momentarily blink. This blinking of
the LED indicators represents a reset of the system
12