Emerson SI-DeviceNet User Manual page 70

12.1.2 Module error codes
If the option module detects an internal error during operation, it will force a trip on the
drive and provide a sub-trip string for a clearer definition of the trip. The table below
shows the possible module error codes.
Table 12.2 Module error codes
Value
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
12.1.3 DeviceNet error codes
If the SI-DeviceNet module detects a DeviceNet error during operation, it will force a trip
on the drive and provide a sub-trip string for a clearer definition of the trip. The table
below shows all possible SI-DeviceNet error codes.
Table 12.3 DeviceNet network error codes
Value
0
100
101
70
Text
SW fault Software fault
BG Orun Background task overrun
FW invalid Invalid firmware for hardware version
Drv unknown Unknown drive type
Drv unsupported Unsupported drive type
Mode unknown Unknown mode
Mode unsupported Unsupported mode
FLASH corrupt Corrupted Non-volatile Flash
Dbase init Database initialization error
FS init File system initialization error
Memory alloc Memory allocation error
Filesystem File system error
Configuration Configuration file error
OHt Overheated
TO drv The drive has not responded with the watchdog period
eCMP eCMP comms failure
TO eCMP slot 1 Slot 1 eCMP timeout
TO eCMP slot 2 Slot 2 eCMP timeout
TO eCMP slot 3 Slot 3 eCMP timeout
TO eCMP slot 4 Slot 4 eCMP timeout
Fact Setting Missing factory setting
Config Load Error loading saved configuration file
Failed to update parameter after drive mode being
RT Config
changed
Read Par Failed to read parameter during cyclic communication
Write Par Failed to write parameter during cyclic communication
Text
No trip No trip
Link Loss The link to the network has been lost
Bus Off The CAN layer of the module has entered the Bus Off state
Description
Description
SI-DeviceNet User Guide
Issue Number: 2