Emerson SI-DeviceNet User Manual page 55

11.1.3 ProductCode
Name:
Class
Instance
Attribute
Identifies the current drive configuration, and is used to link a node to the installed EDS
files. ProductCode is calculated as shown below.
Table 11.2 Generic ProductCode
b15 b14
0
Drive Type returns the code for the product (i.e. the drive). This is 2 for Unidrive M600 to
M810, and 3 for Unidrive M100 to 400.
Pr 11.028 returns the drive derivative number.
Pr 11.084 returns the drive operating mode, e.g. Open-loop = 1, RFC-A = 2, RFC-S = 3,
Regen = 4, etc.
In advanced mode, ProductCode is calculated as shown below.
Table 11.3 Advanced ProductCode
b15 b14
Product
Pr 11.029 returns the major software revision number.
Local Slot indicates the slot in which the SI-DeviceNet is installed: 0 = slot 1, 1 = slot 2,
2 = slot 3.
Pr 11.084 returns the drive operating mode, e.g. open loop, closed loop, servo, etc.
Slot X indicates the family of installed in the lowest numbered slot, excluding the slot
where this SI-DeviceNet is installed. Slot X = Pr MM.001/100.
Slot Y indicates the family of installed in the highest numbered slot, excluding the slot
where this SI-DeviceNet is installed. Slot Y = Pr MM.001/100.
SI-DeviceNet User Guide
Issue Number: 2
ProductCode
0x01
Default
0x01
Data Type
0x03
Access
b13 b12 b11 b10
Drive Type
b13 b12 b11 b10
((Pr 11.029/100) * 3) +
Local Slot
See below
UINT
Get
b9 b8 b7 b6
Variant
Pr 11.028
b9 b8 b7 b6
Pr 11.084
b5 b4 b3 b2 b1
Drive Mode
(Pr 11.084) - 1
b5 b4 b3 b2 b1
Slot X Slot Y
b0
0
b0
55