Advanced Analog Input Channel; Embedded Or Analog Input Channel; Legend Of Embedded Or Advanced Input Channel - Lightware MMX8x8-HDMI-4K-A User Manual


  
5. Software Control – Lightware Device Controller
5.6.3. Advanced Analog Input Channel
This settings refers to the advanced analog audio signal.
e
1
w
q
9
8
5.6.4. Embedded or Analog Input Channel
This settings refers to the chosen audio of the embedded HDMI signal
(or the analog audio signal).
3
4
w
6
q
9
8
7
MMX8x4-HT series – User's Manual
e 3
2
5.6.5. Legend of Embedded or Advanced Input Channel
Channel name Displays the channel name. All the settings
1
below belongs to the channel.
Digital audio Drop-down menu for selecting the digital audio
2
selector menu channel. This setting affects to the crosspoint,
it connects the chosen input to the analog
audio output (O5).
Green tick shows that the input is available.

Warning icon shows that the port can not be

chosen (it was locked).
Phase invert It inverts the phase of the input signal.
5
3
button
Gain section GAIN setting is for increase (or decrease) the
4
6
input signal level, expressed in dB. For more
information see
Sampling It shows the sampling frequency of digital audio.
5
frequency
display
HPF button/ See more details in
6
LPF button section.
EQ section: The equalizer section is for set the proper rate of
7
HIGH, HMID, the different frequencies (high: 8kHz; high-mid:
LMID, LOW 1.6 kHz, low-mid: 400 Hz, low: 100Hz).
See more details in
section.
7 Input volume See more details in
8
fader section.
Signal See more details in
9
indicator chart section.
Mute/Unmute Mutes/unmutes the audio input.
q
Duck button This is a voice activation feature, allowing the
w
volume of the voice of a person speaking into
the microphone to be automatically focused,
and the volume of the rest of the sounds to
be lowered as soon as the presenter starts
speaking.
Balance Balance can be set in this section. For more
w
section details, see
41
Gain settings.
Microphone Input Channel
Equalization (EQ) settings
Microphone Input Channel
Signal indicator chart
Panorama or Balance settings.