Hdmi Input Port Properties - Lightware MMX8x8-HDMI-4K-A User Manual


  
5. Software Control – Lightware Device Controller
5.5.3. HDMI Input Port Properties
Click on a port to display its properties; Signal status information and
the most important parameters are displayed.
HDMI Input Port Properties Window
MMX8x4-HT series – User's Manual
Available Settings
Port name
▪
Mute/unmute the port;
▪
▪ Lock/unlock the port;
HDCP setting (enable / disable);
▪
Audio mode (HDMI audio passthrough / Embed from aux audio
▪
/ Deembed to aux audio)
Frame Detector;
▪
▪ Reloading Factory Default Settings for the selected port.
Audio mode
INFO: Audio mode is available at I5, I6 ports of MMX8x4-HT420M and
I2, I4, I6, I8 ports of MMX8x8-HDMI-4K-A model.
Depending on the chosen audio mode the following parameters can be set:
HDMI audio passthrough
The embedded audio of the HDMI signal will be transmitted without
any modification.
Embed from aux audio
Audio embedder is able to add (or replace) an audio stream to an
HDMI video.
Mute/unmute
▪
▪ Volume: from 100 to 0%, in step 1% (0 dB to -48.18dB, default
is 0 dB)
Balance from -100 to 100, in step 1 (default is 0 = center)
▪
▪ Gain from 0.00 to 24.00, in step 1.00 (default is 0.00)
Deembed to aux audio
Audio de-embedder is able to separate the HDMI video and audio.
▪ Mute/unmute
▪ Volume: from 100 to 0%, in step 1% (0 dB to -95.62dB, default
is 0 dB)
Balance from -100 to 100, in step 1 (default is 0 = center)
▪
37