The Prtdiag Command - Oracle SPARC Enterprise M4000 Installation And Service Manual

Typical Output of the cfgadm Command (2 of 2)
EXAMPLE C-2
pcie3
pcie4
pcie5
pcie6
C.3.4

The prtdiag Command

The prtdiag command displays information about the server, including basic
details about the PCI cards in the External I/O Expansion Unit. To use this
command, refer to the prtdiag
This is typical output of the prtdiag command
Typical prtdiag Output
EXAMPLE C-3
# prtdiag
System Configuration: Sun Microsystems sun4u Sun SPARC Enterprise (FF2) Server
System clock frequency: 1012 MHz
Memory size: 8192 Megabytes
==================================== CPUs ====================================
CPU
LSB Chip
--- ----
00 0
00 1
====================== Memory Configuration ======================
Memory Available
LSB Group Size
--- ------ ------------
00 A 4096MB
00 B 4096MB
========================= IO Cards =========================
LSB Name
--- -------------- ------------
00 scsi
00 network
00 network
00 pci0,0
00 network
00 network
C-12 External I/O Expansion Unit for SPARC Enterprise Mx000 Servers Installation and Service Manual • April 2011
etherne/hp
fibre/hp
fibre/hp
fibre/hp
CPU
ID
--------------------
0, 1, 2,
8, 9, 10,
Memory
Status
-------
okay
okay
Model
LSI,1064
N/A
N/A
N/A
SUNW,pcie-no
SUNW,pcie-no
connected
connected
connected
connected
man page.
(1M)
Run L2$
MHz MB
---- ---
3 2150 4.0
11 2150 4.0
DIMM Number of
Size DIMMs
----- ---------
1024MB
1024MB
configured ok
configured ok
configured ok
configured ok
CPU CPU
Impl. Mask
----- ----
6 129
6 129
4
4