Table of Contents
Advertisement
4.13. SMS gateway function
External applications such as network monitoring systems can send SMS text messages via the
AlarmManager's integrated modem. Communication is carried out via the build-in web server and the HTTP
protocol. The following HTTP call is necessary for this function:
Replace the variables with your data. You can send a test SMS from any web-browser.
HTTP command structure:
http://AlarmManager-IP/sendmsg?user=myUser&password=myPassword&to=012341234567&text=myText
AlarmManager-IP
IP address of the AlarmManager (Default 192.168.100.222)
myUser
Username (User with access right to send SMS messages)
myPassword
Password
0049...
Mobile number in national or international notation
To use the character „+" in the URL please replace it with „%2B"
Exp.: „+49" replaced with „%2B49"
myText
Text-message with up to 160 characters (Up to 320 characters possible. In this case
2 Messages will be sent)
HTTP return code:
200 when SMS sending was successful
300 when SMS sending was unsuccessful
Application
(SMS-Message)
4.14. SMS Limit
To avoid sending too many SMS at once (e.g. by a wrong configuration of the Kentix system)
an SMS limit of 100 SMS per 6 hours is defined in the AlarmManager.
If more than 100 alarm messages are triggered the AlarmManager will automatically stop the SMS alarming.
The limit can be reset by the alarm acknowledgement or disarming.
If necessary the limit can also be increased to 10,000.
Page
22
HTTP (Port80)
(06-2017, subject to change)
SMS
kentix.com
Advertisement
Table of Contents
