1. Manuals
  2. Brands
  3. Kentix Manuals
  4. Security System
  5. MultiSensor-LAN
  6. User manual

Kentix MultiSensor-LAN User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User-Manual
MultiSensor-LAN
From Firmware Version 2.xx.xx

Advertisement

Table of Contents
loading

Related Manuals for Kentix MultiSensor-LAN

Summary of Contents for Kentix MultiSensor-LAN

  • Page 1 User-Manual MultiSensor-LAN From Firmware Version 2.xx.xx...

  • Page 2: Table Of Contents

    User accounts and notification! 2.8. Language! 2.9. Software update MultiSensor-LAN! 2.10. Copy or save Configuration of MultiSensor-LAN! 2.11. XML-Output! 2.12. Switch alarm output 2! 2.13. Control a network camera via HTTP requests! 2.14. External I/Os MultiSensor-LAN! 3. How to open the MultiSensor! 4.

  • Page 3: Introduction And Summary

    The MultiSensor-LAN can be a stand-alone device or operated in conjunction with a Kentix AlarmManager. By the use with an AlarmManager provides you a more extensive functionality. The MultiSensor-LAN is installed in server room or rack. It controls and forwards all alarm and fault messages to the responsible persons.

  • Page 4: Multisensor-Lan

    Important! Reset the IP address If you have forgotten the login informations of the MultiSensor-LAN, activate the RESET button at the device inside. The device will reset the login information to the default settings. The RESET button is on the bottom side, after you have remove the device-lid (see picture below).

  • Page 5: Software Function Multisensor-Lan

    - Function or input / output status is switched off Monitoring: Graphical display of the recorded sensor measurements. The MultiSensor-LAN records values for up to 7 days, available as XML-Request. The request can be made with the following string: http://IP/xml/record.xml NOTE! The Sensor records a value for temperature and humidity every 10 minutes.

  • Page 6: Configuration - Network

    MultiSensor are included. SNMP settings Configuration of the Simple Network Management Protocols. The MultiSensor-LAN is able to send alarm messages as SNMP-Traps. Enter both SNMP host addresses for this. Further the sensor can be prompted or partially configured via SNMP. The functions which are available for the SNMP communication are specified in the supplied MIB (Management Information Base).

  • Page 7: Configuration - Sensors And Alarm

    The MultiSensor has two configureable alarm inputs. At this alarm inputs external signaling devices can be plugged (e.g leakage sensors, door contacts or malfunction messages from external devices). The trigger is set by a potential free contact (opener). The trigger logic can be set to HI or LOW. www.kentix.de Page 7 (09-2012, subject to change)!

  • Page 8: User Accounts And Notification

    E-mail signature Enter a signature for e-mail notifications. This signature has a limit of 300 characters. Language Choose the language of the Website from the Kentix MultiSensor-LAN. It is possible to choose between the english and the german language. www.kentix.de...

  • Page 9: Software Update Multisensor-Lan

    Software update MultiSensor-LAN The MultiSensor-LAN offers the option to update the software via the integrated FTP server on a simple way. Latest software updates are available on the download area at www.kentix.de. The current installed software version you can see at the web server under „System“.

  • Page 10: Xml-Output

    Switch alarm output 2 In the category system you can find a way to turn on the alarm output 2 of the MultiSensor-LAN. You have the ability to turn the alarm output on over time. To do this enter a time in seconds. To switch the output permanently enter a period of 0 seconds.

  • Page 11: Control A Network Camera Via Http Requests

    Control a network camera via HTTP requests Th MultiSensor-LAN offers the possibility to send in case of an alarm a control frequency as a HTTP request to any IP ready network camera. So you can additional to the e-mail alerting also received a video picture or a video sequence.

  • Page 12: External I/Os Multisensor-Lan

    The switching outputs 6/7 are open collector transistor outputs and the maximum load is 100mA. For plug ´n play use of the outputs you can choose the KENTIX modules of following types: KIO1, KIO2 The switching output 6 can only be activated via the SMS remote function.

  • Page 13: How To Open The Multisensor

    3. Pull the lid by the sides apart slightly and put the casing lid on the bottom part. 4. Slide the lid on the bottom part till the lid snap in with a clicking noise www.kentix.de Page 13 (09-2012, subject to change)!

  • Page 14: Data Sheet Multisensor-Lan (Kms-Lan)

    Data sheet MultiSensor-LAN (KMS-LAN) Connectable devices Stand-Alone operation (integrated web server) AlarmManager-PRO Sensor - temperature range -40 to 125°C Sensor - Relative humidity range 0 to 100% Dew point in °C calculated Sensor - motion PIR sensor, trigger sensitivity configurable aperture: ca.

  • Page 15: Support

    Your copy, modification, commercial use, use in other media or transfer to third parties is prohibited or requires the prior express permission of such KENTIX GmbH. Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27th January 2003 concerning used electrical and electronic appliances, it must be disposed of properly.

Table of Contents