Table of Contents
Advertisement
10.4. AccessPoint
Door Control
In the view „Door Control" single doors can be accessed for a remote opening. Select the desired door and then
press the button „Open door". The person at the door can open it now for the next 15 seconds.
For the remote opening a knob (DoorLock-DC) must be turned to wake it up.
At a door lever (DoorLock-LE) a booking with any RFID media (Mifare) is required.
At a wall reader the assigned relay of the AccessPoint is triggered.
The cabinet lock also has to be woken up by pressing the button at it.
Favorites
The view „Door Control" always shows all DoorLock-devices / doors configured in the system.
In order to be able to directly access frequently used doors for a remote opening, these doors can be marked as
favorites here.
To do so, press the „+" and select the desired doors for this view.
The favorites view will then automatically become the first view after selecting the AccessPoint-profile.
Logbook
The logbook shows the last 100 bookings made at the DoorLock-devices in the system.
If necessary older entries can also be called up.
NOTE!
The Kentix360 security key stored in the AccessPoint is required for the accessing the logbook. Without
this key the reading of logbook entries is not possible.
Page
99
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
