Table of Contents
Advertisement
Check zone state
The state of the assigned alarm zone (armed or disarmed) can be checked at a KeyPad before switching the
zone by pressing „0". The KeyPad retrieves the status of the assigned alarm zone from the AlarmManager and
signals it via the left or right LED.
Learn User / RFID cards
Via the ControlCenter RFID cards of the users can be read at a KeyPad.
To do this select the KeyPad in the „Sensors-Devices" tab and activate the option „Teach-in RFID card via
KeyPad".
Then press one of the buttons „Arming" or „Disarming" and hold the user card in front of the RFID reader. After a
few seconds the number / ID of the card appears in the list „Available RFID cards". The card can then be
assigned to a user account by selecting and clicking the arrows.
Repeat the process until all cards have been read and assigned to a user account. Finish the process by
deactivating the option „Teach-in RFID card via KeyPad" and transfer the changed configuration to the
AlarmManager (Save).
Page
54
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
