Table of Contents
Advertisement
Navigation
Dashboard
- Starting page with measurement table, control of the 2nd digital output, logbook
Login
- User login
Configuration
- Basic configuration, MultiSensor (Sensor- and alarm settings), Users (Login,E-Mail)
System
- System information (software version), test functions, configuration management,
firmware update, device reset
- logbook
Help
- Help and support information
Logout
- User logout
5.6.3. Configuration - Basic configuration
Device name
Configuration of the device name, this name can be chosen freely.
Language
Select the displayed language of the MultiSensor's Website.
You can choose between german and english language.
Temperature unit
Switches the temperature evaluation and display of the MultiSensor-LAN between celsius and fahrenheit.
IP address / network mask / gateway / DHCP / MAC-address
Network configuration of the MultiSensor. If DHCP is enabled, the DHCP server should always assign the same
IP address to the MultiSensor-LAN.
If you need the MAC address of the MultiSensor for your router or firewall settings, you will find it here.
When changing the network settings, the MultiSensor automatically performs a reset.
DNS1/2 (Domain Name Server Addresses)
Enter the name server address. Depending on network configuration e.g. on use of an ADSL router it can be the
gateway address.
NTP1/2
Configuration of the time server (network time protocol). The NTP configuration is needed if you use the time-
controlled arming and disarming.
Public NTP servers: 0.de.pool.ntp.org or 1.de.pool.ntp.org
IP-address and activation of AlarmManager communication
Activate the communication with the Kentix AlarmManager-PRO here. Enter the IP-address of the
AlarmManager and activate the checkbox.
Der AlarmManager-PRO takes control of the configuration of the MultiSensors alarm settings.
The local alarm- / threshold values are then inactive.
FTP server activation
The integrated FTP server can be activated or deactivated. The FTP access will be needed for a software
update of devices with an old firmware version (< 4.00.00). Look up in the chapter „software update" for it.
Page
31
Public DNS servers: 8.8.8.8 or 8.8.8.4
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
