Table of Contents
Advertisement
Alarm handling
The Retrigger time defines, after which time the alarms Flicker, Swell or Peak are reset for the next triggering.
This setting avoids that an event which persists for a longer period will lead to a repeated alarming in short
distances of time.
Costs
Value for the costs per kilowatt hour and the monetary unit.
Reset energy consumption
Sets the internal consumption counter of the MultiSensor-RACK back to 0 and deletes all recorded data.
For safety reasons the user password has to be entered before the reset.
5.8.11. Users
Enter data for up to 5 users with individual passwords. The passwords also give access to the switching function
of the PDUs and the digital output 2.
The account data of the first user are in addition the account data of the internal ftp-server for running updates
on the MultiSensor-RACK. For E-Mail alarming enter the addresses of the recipients here.
5.8.12. System
System information
Shows the firmware version numbers of the MultiSensor-RACK.
Find the actual firmware on the Kentix Website in the Software section.
Test functions
Test your E-Mail and SNMP settings via the two test buttons. The E-Mail or Trap sending is logged and can be
checked in the logbook.
Backup configuration
For backup purposes the actual configuration of the MultiSensor can be downloaded to the PC.
Restore configuration
Loads a previously created backup into the device and restarts it. The settings of the backup directly get active
afterwards.
Firmware-Update
Loads a firmware file (image.bin) into the MultiSensor and restarts it.
NOTE!
Please note the corresponding release notes of the downloaded update!
Restart
The MultiSensor-RACK can be restarted for testing- or maintenance purposes. Note that the data recording is
suspended for the duration of the restart. The power supply of the connected devices is NOT interrupted during
the restart.
5.8.13. Configuration of the vibration sensor
Define the triggering threshold for the integrated vibration sensor. The alarm is triggered, when the threshold is
exceeded.
The trigger sensitivity can be adjusted to detect slight vibrations (e.g. moving of the rack) as well as heavy
vibrations (bumps or movement of the MultiSensor-RACK) can be detected.
Page
48
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
