2. Connection examples and installation notes
2.1. StarterSet-BASIC/PRO-1
2.2. StarterSet-PRO-2
CompleteSet-PRO 2:
1. Connect the MultiSensor-RF with the AlarmManager or the KIO-Power-Adapter.
Connect the MultiSensor-LAN with a PoE-Switch.
Follow steps 2 to 8 described for „StarterSet-BASIC/PRO-1".
2. The KeyPad is added to the configuration like a Radio Sensor.
For the configuration please follow the steps as described on p.52 in this manual.
3. Save the Configuration to transfer it into the AlarmManager.
Page
8
1. Connect AlarmManager and MultiSensor via
patchcable.
2. Connect power supply to AlarmManager and
current.
3. Download, install and start Kentix ControlCenter.
(Software-Download on www.kentix.com)
4. Enter Kentix-Default-IP-Address
(192.168.100.222) and the default user data
(admin/password) and press „Login".
(check your own network-settings).
5. Setup IP-Address of AlarmManager in the settings.
6. Add Radio Sensor in „Sensor-Devices".
7. Make individual setup.
8. Save the Configuration to transfer it into the
AlarmManager.
(06-2017, subject to change)
kentix.com