Table of Contents
Advertisement
Dashboard
MultiSensor values and status:
Display of the sensor measurements and alarm conditions. This display will be actualized all 5 seconds.
- No underflow or exceeding of the measured values
- There is an underflow or exceeding of the measure value, an alarm was triggered
- The motion detection is disarmed (only visible after login)
- The motion detection is armed (only visible after login)
NOTE!
The Sensor records a value for temperature and humidity every 10 minutes. Additionally the values in an alert
case are also recorded.
Page
30
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
