Table of Contents
Advertisement
Step 3: Fasten cover
Attach the cover to the wall reader. Please note that the cover eventually must be screwed
(depending on the version).
TX-44
S-Color
9.2.3.4.
Installation of the wall reader (surface mounted)
With the surface mounted version the wall reader is already preassembled in a 2-part surface-mounted housing.
The lower housing part is mounted on the wall using the supplied screws.
Then the connection cable is inserted through the cable inlet and then connected to the wall reader.
The screwed connection can then be closed and the upper housing part screwed to the lower part.
Page
76
(06-2017, subject to change)
kentix.com
Advertisement
Table of Contents
