Software Function Multisensor-Lan; Homepage - Kentix MultiSensor-LAN User Manual

Software function MultiSensor-LAN

The following are the stand alone functionality of the integrated web server described.
For the described functionality no AlarmManager is required.
If you operate the MultiSensor-LAN with the AlarmManager-PRO,the AlarmManager run on this configuration
and monitoring functions.

Homepage

MultiSensor values and status:
Display of the sensor measurements and alarm conditions. This display will be actualized all 5 seconds.
OK ! - There is no measurement undershot or exceeded
NOK! - There is a measurement undershot or exceeded, an alarm is triggered
ON ! - Function or input / output status is switched on
OFF! - Function or input / output status is switched off
Monitoring:
Graphical display of the recorded sensor measurements. The MultiSensor-LAN records values for up to 7
days, available as XML-Request. The request can be made with the following string:
http://IP/xml/record.xml
NOTE!
The Sensor records a value for temperature and humidity every 10 minutes. Additionally the values in an
alert case are also recorded. If the sensor is disconnected from power, all recordings are deleted and start
from the beginning.
Page 5 !
(09-2012, subject to change)!
www.kentix.de