Table of Contents
Advertisement
Removing bulbs for low and main beam
pav. 346 Removing bulbs for low and main beam
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
›
Remove the protective caps
A
›
Press the latch
on the holder in the direction of the arrow
A
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Plug the connector into the new bulb so that the fixing lug
points upwards.
›
Insert the connector, with the bulb, into the headlight opposite to the direc-
tion of arrow
until you feel it lock into place.
2
Change the light bulb for the parking light
pav. 347 Change the light bulb for the parking light
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
›
Remove the protective cap
B
ir
puslapyje 296.
and
» pav. 345
puslapyje 296.
B
1
.
2
on the bulb
B
ir
puslapyje 296.
» pav. 345
puslapyje 296.
›
Press the attachment securing lugs in the direction of arrows
fully pull out the bulb holder with the bulb.
›
Grasp the holder in area
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the holder until it stops.
›
Insert the housing with bulb into the headlight again.
›
Fit the protective cap
Changing the bulb for the front turn signal light
» pav.
346.
pav. 348 Changing the bulb for the front turn signal light
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
›
Remove the protective cap
›
Remove the holder with the bulb by jiggling it out in the direction of the ar-
row
» pav.
1
›
Hold the holder with the bulb in the locations shown by the arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Insert a new bulb in the holder until it stops.
›
Slide the holder with the bulb with the fixing lug
into the recess on the reflector.
›
Fit the protective cap
.
A
» pav. 345
puslapyje 296.
B
» pav. 345
puslapyje 296.
B
348.
» pav. 345
puslapyje 296.
B
, and care-
1
.
2
ir
puslapyje 296.
.
2
upwards so that it fits
B
297
Fuses and light bulbs
Advertisement
Table of Contents
