Operation overview
pav. 284 Operating lever
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
ACC sistemos funkcijų, kurios valdomos svirtele, apžvalga
Activate ACC (regulation deactivated)
1
Start control (resume) / increase speed by 1 km/h at a time
2
(sprung position)
Reguliavimo nutraukimas (spyruokliuojanti padėtis)
3
Deactivate ACC
4
Increase speed by 10 km/h at a time
5
Decrease speed by 10 km/h at a time
6
Set proximity level
A
Start control / reduce speed in increments of 1 km/h
B
If the lever is set from the position tiesiogiai nustatoma į spyruokliuojančią
padėtį , tuomet išsaugomas aktualus greitis ir pradedamas reguliavimas.
Start control
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
Basic requirements for start of control
The ACC is activated.
On vehicles with manual transmission, the second gear or a higher gear is
selected and the current speed is greater than 30 km/h.
On vehicles with automatic transmission, the selector lever is in the D/S
position or in the Tiptronic position.
Start control
›
Press the button
›
arba: Nustatykite svirtelę į spyruokliuojančią padėtį
puslapyje 235.
je 237 .
The ACC takes the current driving speed and performs the control, the war-
» pav. 284
ning light
If the control is started by moving the lever to the position , ir greitis jau
išsaugotas, ACC sistema perima šį greitį ir atlieka reguliavimą.
Nurodymas
If control is started at a speed of less than 30 km/h on vehicles with an auto-
matic transmission, the speed of 30 km/h is stored. The speed increases auto-
matically to 30 km/h or is regulated with respect to the speed of the vehicle
ahead.
Stop/resume control
Pirmiausiai perskaitykite ir atkreipkite dėmesį į
Stop control
›
Set the lever into the sprung position
›
arba: Nuspauskite stabdžių pedalą.
Control stops, the speed remains stored.
Resume control
›
Start control
» pav. 284
puslapyje 237 .
illuminates in the instrument cluster.
» puslapis
237, Start control.
puslapyje 235.
» pav. 284
puslapy-
puslapyje 235.
» pav. 284
puslapyje 237 .
237
Assist systems