Table of Contents
Advertisement
The moved map can be centred/aligned to the vehicle, destination or route po-
sition.
›
To centre the map, tap on function surface
Options for map display in the split screen
Taikoma transporto priemonėms su Infotainment Columbus be skaitmeninio
prietaisų skydelio.
pav. 231 Map in split screen
›
In the split screen, tap on function surface
Depending on the context, some of the following function surfaces will be dis-
played in area
.
B
Map display with the route from the current vehicle location to the desti-
nation
Change the map orientation
2D - Two-dimensional map display
3D - Three-dimensional map display
Turn on/off the automatic change of scale
Map display options in the digital instrument cluster
Taikoma transporto priemonėms su Infotainment Columbus be skaitmeninio
prietaisų skydelio.
The ignition must be switched on for map display in the digital instrument
cluster.
190
Infotainment
» pav.
230.
A
» pav.
231.
A
Only applies to Infotainment Columbus
The map can be displayed in the digital instrument cluster and in Infotainment
at the same time.
The map type shown in the digital instrument cluster can be selected in thena-
vigation menu item → Žemėlapis → Žemėl. vaizdas priet. skydelyje.
The map scale can be adjusted with the dial
wheel
» puslapis
40,
Applies to Infotainment Amundsen
The map can be displayed in the digital instrument cluster or infotainment
screen.
To change the display in the navigation main menu, tap function surface
▶
» pav. 211
puslapyje 180.
The map type shown in the digital instrument cluster can be changed in thena-
vigation main menu in the menu item nustatymus.
Changing the map scale can be carried out in one of the following ways.
▶
With the function surfaces in Infotainment
▶
Turning the knob .
▶
With the dial
on the multifunctional steering wheel
A
POIs display
The Infotainment system offers the possibility of displaying POI symbols on
the map on the Infotainment screen.
›
To activate/deactivate the display, go to the main Navigation menu and tap
on the function surface → Spec. tikslai.
›
To select the POIs to be displayed, go to the main Navigation menu and tap
on the function surface → Žemėlapis → Pasirinkti specialiųjų tikslų kategorijas ir
pasirinkite pageidaujamas kategorijas (maksimaliai 10).
Road sign display
Infotainment offers the option of displaying the traffic signs stored in the navi-
gation data or detected by the front camera during guidance on the Infotain-
ment screen
» pav. 212
puslapyje 180.
G
›
To switch on/off the road sign display in the main menu Navigation, tap the
function surface → Žemėlapis → Rodyti kelio ženklus.
on the multifunction steering
A
B
» puslapis
188.
» puslapis
40.
Advertisement
Table of Contents
