Table of Contents
Advertisement
Pushing in
›
Insert the SD card in the slot in the direction of arrow (with the cut end fa-
cing right), until it „locks"
» pav. 188
Removing
›
Before removing the SD card, go to the main Media menu and tap function
surface → Saugiai išimti.
›
Press on the inserted SD memory card. The SD card „jumps" into the eject
position.
ATSARGIAI
Do not use an SD card with a broken write protection „slide" - there is a risk
■
of damage to the SD card reader!
When using an SD card with an adapter, vehicle vibrations might cause the
■
card to fall out of the adapter.
USB input
USB įėjimo sumontavimo vieta ir informacija apie jo naudojimą
The USB input audio source can be connected directly or via a connecting cab-
le.
›
To connect, insert the USB audio source into the appropriate input.
›
To disconnect the USB in the Media main menu, tap on the function surface
→ Saugiai išimti.
›
Disconnect the audio source from the corresponding USB input.
USB audio source
With the ignition, the charging process starts automatically after the USB au-
dio source is connected (applies to audio sources where charging via the USB
connector is possible).
152
Infotainment
pav. 189
Swing: SD kortelės įstūmimas
or
» pav.
189.
» puslapis
The charging efficiency can differ compared to the charging from the usual
mains power supply.
Depending on the type of the connected external device and the frequency of
use, the charging current may not be sufficient to charge the battery of the
connected device.
Some connected audio sources may not be recognised and cannot be charged.
ATSARGIAI
USB extension cords, or reducers may impair the function of the connected
audio source.
Nurodymas
We recommend that you use extension cords from ŠKODA Original Accesso-
ries.
®
Bluetooth
player
Infotainment allows audio files of a connected Bluetooth
the A2DP and AVRCP audio profile.
With Infotainment, multiple devices can be paired using Bluetooth
one of them can be used as a Bluetooth
Connect /disconnect
›
To connect the Bluetooth
structions as for pairing Infotainment with a
›
To disconnect the Bluetooth
external devices
» puslapis
94.
®
Replace Bluetooth
player (applies to Infotainment Amundsen, Bolero)
If you would like to replace a Bluetooth
ment as a Telephone at the same time, then a relevant information message
appears in the Infotainment screen.
›
End the connection to the currently connected Bluetooth
the pairing procedure
ATSARGIAI
If an external device is connected to Infotainment using Apple CarPlay
orAndroid Auto, then it cannot be connected using Bluetooth
®
player.
®
player with Infotainment- follow the same in-
telephone» puslapis
®
player, end the connection in the list of paired
164.
®
Player which is connected to Infotain-
» puslapis
164, Managing paired external devices.
®
player to play using
®
, but only
161.
®
player and repeat
®
.
Advertisement
Table of Contents
