Table of Contents
Advertisement
Route calculation and start route guidance
Route calculation is done on the basis of the set route options. The route op-
tions can be set: → Maršruto parinktys.
Alternative routes
With selection of alternative routes turned on, the following menu is displayed
after the calculation of a new route
– ekonomiškas maršrutas su galimai minimaliu važiavimo laiku ir trum-
A
piausiu važiavimo nuotoliu – maršrutas paryškintas žalia spalva
– greičiausias maršrutas link tikslo, net jeigu tuo tikslu reikėtų važiuoti
B
aplinkiniais keliais – maršrutas paryškintas raudona spalva
– trumpiausias maršrutas link tikslo, net jeigu dėl to prireiktų ilgesnio va-
C
žiavimo laiko – maršrutas paryškintas oranžine spalva
In the functional surfaces of the alternative routes, information on the route
length estimated travel time and the following symbols are displayed (applies
to the Infotainment Columbus).
Use of a toll motorway
Use of a train / ferry
Using a tunnel
Use of a toll road
Using a vignette duty road
It is possible to select an already calculated alternative route before the calcu-
lation of the remaining routes is completed.
Selecting the type of route will start the route guidance.
If no route selection is made within 30 s after the calculation of all routes, the
route guidance is automatically started according to the preferred route type.
192
Infotainment
pav. 233
Alternative routes
» pav.
233.
Route calculation for the trailer
When driving with a trailer or any other accessory connected to the trailer
socket, we recommend that you switch on the trailer recognition, if necessary
to set the maximum speed for towing a trailer.
›
For calculating the route for towing a trailer, tap the functional surface in the
main navigation menu → Maršruto parinktys → .
›
To set the maximum speed for towing a trailer, tap the
then the function surface → Vairavimo asistentai → Priekabos atpažinimas →
Didžiaus. leidžiamas greitis priekabai.
Demo mode
The Demo mode provides a travel simulation to the entered destination. The
function offers the chance to travel through the calculated route „virtually".
When the Demo mode is turned on, a menu for route guidance in the Demo
mode or in normal operation is displayed before the start of route guidance.
›
To switch on/offin the main menu Navigation, tap on the function surface
→ Papildomi nustatymai → Demonstrav. režimas.
When the demoMode is switched on, the route starting point can be defined.
›
In the Navigation main menu, tap the function surface → Papildomi nustatymai
→ Nustatyti demonstrav. režimo paleistis tašką.
›
Define the starting point by entering the address or the current vehicle posi-
tion.
›
The demo mode starting point can also be set provided demo mode is turned
on by tapping on the desired map location and selecting the menu item Start
Demo Mode
» puslapis
183, Entering a destination via the map point.
sensor field and
Advertisement
Table of Contents
