Wan - Planet VR-300 Series User Manual

4.5.1 WAN

This page is used to configure the parameters for Internet network which connects to the WAN port of
the router as shown in Figure
of WAN access type.
Object
WAN Access Type
Enterprise 5-Port 10/100/1000T VPN Security Router
4-28. Here you may select the access method by clicking the item value
Figure 4-28: WAN
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Select Static IP Address if all the Internet ports' IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Static Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The router will not accept the IP address
if it is not in this format.
IP Address
Enter the IP address assigned by your ISP.
- 79 -
Description
VR-300 series