Starting Web Management - Planet MGSW SERIES Quick Installation Manual

7. Starting Web Management

The following shows how to start up the Web Management of the Managed
Metro Switch. Note the Managed Metro Switch is configured through an Ethernet
connection. Please make sure the manager PC must be set on the same IP
subnet address.
For example, the default IP address of the Managed Metro Switch is
192.168.0.100, then the manager PC should be set at 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
Managed Switch
IP Address:
192.168.0.100
Logging in the Managed Metro Switch
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100 (the factory default IP address or the one that you have
just changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name and
password "admin" (or the password you have changed via console). The login
screen in Figure 7-2 appears.
10
RJ45/UTP Cable
Figure 7-1: IP Management Diagram
PC / Workstation
with Web Browser
192.168.0.x