Starting Web Management - Planet WGS-804HPT Quick Installation Manual

Industrial wall-mount managed gigabit ethernet switch
Hide thumbs Also See for WGS-804HPT:
Table of Contents

Advertisement

5. Starting Web Management

The following shows how to start up the Web Management of the Wall-mount
Managed Switch. Note the Wall-mount Managed Switch is configured through an
Ethernet connection. Please make sure the manager PC must be set to the same
IP subnet address.
For example, the default IP address of the Wall-mount Managed Switch is
192.168.0.100; then the manager PC should be set at 192.168.0.x (where
x is a number between 1 and 254, except 100) and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 5-1: IP Management Diagram
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs-4215-8tWgs-4215-8t2s

Table of Contents