Table of Contents
Advertisement
Ensure that the surfaces remain visibly wet for the maximum necessary disinfection time
6
specified on the product label.
If a disinfection time is not specified on chemical label for the concentration used, ensure
a
that the surfaces remain visibly wet for a minimum of 10 minutes.
Use additional fresh wipes as needed to ensure continuous wet contact time during the
b
specified disinfection period.
Let air dry.
i
If visible residue is evident after air drying, remove residue with a general isopropyl
ii
alcohol wipe, and let air dry.
Do not reuse wipes. Discard wipes and gloves into clinical waste.
iii
11.6
Error Messages and Troubleshooting
If any error messages appear, follow the instructions in the Digital Radiography Software Manual.
If there is any problem that is not described in the manual, immediately ask your establishment's
safety representative to contact your dealer, distributor, or device manufacturer. Further use
may result in severe personal injury, death, or substantial product damage.
If any abnormal condition, such as smoke, fumes, or strange sounds, is
WARNING
evident, turn off the X-ray detector, turn off and unplug the power
supply from the AC outlet, and immediately ask your establishment's
safety representative to contact your dealer, distributor, or device
manufacturer.
Further use under abnormal conditions may result in severe personal
injury, death, or substantial product damage.
12.0
After-Sales Service for Varex Products
Contact your sales person, distributor, or device manufacturer for after-sales service (including
warranty) or any other information. If information is not available, contact one of the
Varex subsidiaries (regional service headquarters) listed on the last page of this
document.
Field service is limited to replacement of the detector or adding and replacing approved
accessories by authorized personnel. The detector and its accessories are not intended to be
repaired in the field.
For product returns, contact your distributor or device manufacturer for shipping and packaging
instructions. Do not return products to Varex for repair or service without advance
notification. Include all required papers in the shipment.
40
www.vareximaging.com
XRpad2 4343
Hide quick links:
Advertisement
Table of Contents
