Table of Contents
Advertisement
1.0
Scope
This document describes design elements and respective interfaces for the XRpad2 4343 detector.
The XRpad2 4343 X-ray detector series contain specific models for which the main difference is
the scintillator. Applicable mechanical, electronic, and software interfaces are addressed. Varex
digital X-ray Flat Panel Detectors and their accessories are components designed to be integrated
into products by X-ray system manufacturers. Manufacturers are responsible for qualifying,
validating, and certifying their products for their intended uses and meeting all applicable
regulatory requirements.
Final application and intended use is determined by the X-ray system manufacturer and is based
on the completed X-ray system design. It is the responsibility of the X-ray system manufacturer
to confirm the safety, efficacy and compliance of the X-ray system for its intended use, inclusive
of the detector. The Digital Radiography Software referred to in this manual is medical imaging
software for radiography, which is typically supplied by the X-ray system manufacturer or
third-party provider and is not part of the XRpad2 4343 detector.
2.0
Detector Options
The XRpad2 4343 X-ray detector series contain specific models for which the main difference is
the scintillator. The detector types are listed below:
•
XRpad2 4343 HWA
•
XRpad2 4343 HWC
•
XRpad2 4343 HWJ
•
XRpad2 4343 HWK
•
XRpad2 4343 HWN
3.0
This section intentionally left blank.
4.0
This section intentionally left blank.
5.0
Audience
This document is for users of the X-ray detector and for X-ray system manufacturers and X-ray
system installers who are responsible for installing the X-ray detector into an X-ray system.
www.vareximaging.com
1
Hide quick links:
Advertisement
Table of Contents
