Table of Contents
Advertisement
XRpad2 4343
Inspection
Check that the detector is
not damaged.
Check the manufacturing
date of the battery pack to
ensure that its age is not five
years or older.
Check that the battery pack
(wireless mode) or the
Protective Insert (wired
mode) is in the battery
compartment and the
sliding latches are closed.
Check that the battery pack
is not damaged.
Check that the detector is
not loose and all screws are
fixed.
Result
Date
Date
/
/
Good/Bad Good/Bad Good/Bad Contact your dealer,
Good/Bad Good/Bad Good/Bad Replace the battery pack with
Good/Bad Good/Bad Good/Bad Slide the battery pack or the
Good/Bad Good/Bad Good/Bad Replace the battery pack with
Good/Bad Good/Bad Good/Bad Contact your dealer,
www.vareximaging.com
Remedy
Date
/
distributor, or device
manufacturer if there is a
problem.
a new one and recycle the old
one.
Protective Insert into the
battery compartment as
described in
"Section 10.5.1.3,
Removing the Battery Pack"
on page
21.
a new one.
distributor, or device
manufacturer if there is a
problem.
35
Hide quick links:
Advertisement
Table of Contents
