Varex Imaging XRpad2 4343 User Manual page 7

XRpad2 4343
Handling
Never disassemble, modify, or alter the X-ray detector, its components,
WARNING
Battery Pack, battery charger, or accessories. Ignoring this warning
may cause electrical shock and/or unknown hazards, which may result
in severe personal injury, death, or substantial product damage.
Do not touch the interface and power unit or cable and the patient at
WARNING
the same time. Do not let the patient touch the interface and power
unit or cable. Ignoring this warning may cause electrical shock and/or
unknown hazards, which may result in severe personal injury, death,
or substantial product damage.
Place the X-ray detector horizontally on a flat, stable surface. If the
Caution
X-ray detector is placed vertically or in any tilted position, the X-ray
detector must be securely placed in the Bucky tray or securely fastened
to the X-ray detector enclosure or support structure. Ignoring this
caution may result in personal injury or damage to the product.
Do not exceed the maximum uniform load weight of 150 kg
Caution
distributed across the surface of the X-ray detector.
Do not exceed the maximum load weight of 100 kg distributed on an
Caution
area of 40 mm in a diameter of the X-ray detector surface.
Do not drop the X-ray detector. If the X-ray detector is dropped,
Caution
remove the X-ray detector from service, and immediately ask your
establishment's safety representative to verify or re-validate the
proper function of the X-ray detector prior to resuming use of the
detector. Further use under abnormal conditions may result in severe
personal injury, death, or substantial product damage.
Do not expose the backside of the detector with X-rays. Always use the
Caution
top side of the detector for examinations.
www.vareximaging.com
For Your Safety
vii