Topcon DL-501 Instruction Manual page 98

18. OUTPUTTING DATA
8. Align the cursor with the JOB to be output and
press {}.
• The numbers to the right represent the
number of data items in each JOB.
• "*" means the JOB has not been output to an
external device yet.
9. Output starts.
• Press {ESC} to cancel output.
10. Press {ESC} to return when "Completion" is
displayed.
PROCEDURE Outputting JOB data to an SD card
1. Open the external interface hatch cover.
2. Insert an SD card into the SD card slot.
3. Select "JOB" in <Management menu>.
4. Select "Comms output".
5. Select format from "CSV 1", "CSV 2" or
"SDR2X".
6. Check that "Com. locat." is set to "SD".
7. Press [OK].
8. Align the cursor with the JOB to be output and
press {}.
9. Enter a file name and press [OK].
90
* J O B 1
J O B 2
J O B 3
J O B 4
J O B 5
...P T O P
F o r m a t : C S V _ 1
C o m . l o c a t . : S D
C O M M
9 9
2 0
1 5
1 0
5 4
L A S T
O K