Topcon DL-501 Instruction Manual page 64

12. HEIGHT DIFFERENCE MEASUREMENT
1. Press [READ] in the screen at right. (
screen at right is that for elevation mode)
2. Align the cursor with "Search JOB" and press
[LIST] to display a list of recorded JOBs.
Use {}/{} to select "Route data" or "JOB
data" in "Data type".
3. Press [OK] in the screen of step 2 to display a
list of known point data in the selected JOB.
Align the cursor with the desired data and
press {}.
• Press [DETAIL] in the second page to display
detailed information for the selected known
point data.
<S-O data> is restored. The selected known
point name and elevation are displayed.
"Done" is displayed next to data already used
for setting-out measurement.

Selectable options for the above data items are as follows.
• Data type: JOB data/Route data (the relevant route is displayed in the bottom line when "Route data"
is selected)
56
The
S - O d a t a
Z
M O D E
S e a r c h J O B
: J O B 3
D a t a t y p e
: J O B d a t a
L I S T
0 0 0 0
0 0 0 1
0 0 0 2
0 0 0 3
0 0 0 4
...P
S - O d a t a
0 0 0 0
Z
M O D E
0 0 0 0
0 0 0 1
0 0 0 2
0 0 0 3
0 0 0 4
...P
: 4 1 . 0 0 0 0 0
R E A D
T O P L A S T
: 1 8 . 0 0 0 0 0
R E A D
T O P L A S T
1
m
O K
O K
P 1
S R C H
1
m
O K
D o n e
P 1
S R C H