Displaying Route Information - Topcon DL-501 Instruction Manual

6. Press [YES]. The route is deleted and the
route list is restored.
16.2

Displaying Route Information

It is possible to review data saved within the selected route.
• Route data review is performed in <Route menu>.
PROCEDURE
1. Select "Management" in <Menu>.
2. Select "Route" in <Management menu>.
<Route menu> is displayed.
3. Select "View".
4. A list of start information and fixed points is
displayed in the order in which they were
observed. Align the cursor with the desired
measurement point and press {}.
• "Start info": Start conditions input before
height difference measurement. Multiple
"Start info" data may exist when a route
measurement has been interrupted and
restarted.
• "fixed pt.": Data and details obtained when
setting a fixed point during height difference
measurement.
R o u t e d e l e t i o n
R o u t e s e t t i n g
d e l e t i o n
C o n f i r m ?
R o u t e m e n u
1 . R o u t e s e t t i n g
2 . R o u t e d e l e t i o n
3 . C o m m s o u t p u t
4 . V i e w
5 . I S d e l e t i o n
S t a r t i n f o . 1
f i x e d p t . 1
f i x e d p t . 2
f i x e d p t . 3
S t a r t i n f o . 2
...P T O P
16. ROUTE SETTINGS
N O Y E S
L A S T
79