Connecting Via Communication Cable - Topcon DL-501 Instruction Manual

3. Select "Comms output" in <JOB menu> and
set "Com.locat."

"18.1 Outputting JOB Data PROCEDURE
Outputting JOB data to host computer"
DL starts outputting data.
• If a connection has not yet been established,
the screen at right is displayed. After a
connection has been established, the data is
output.
9.5

Connecting via Communication Cable

PROCEDURE Basic cable settings
1. Connect the DL to the external device using
the cable.

Cables: "24. OPTIONAL
ACCESSORIES"
2. Select "Comms setup" in <Config menu>.
Set communication conditions.

"19.3 Communication Setup"
9. CONNECTING TO EXTERNAL DEVICES
J o b i d
J O B 1
F o r m a t
O u t p u t t i n g
B l u e t o o t h
W a i t i n g f o r
c o n n e c t i o n . . .
C S V _ 1
9 8 / 9 9
33