Outputting Data; Outputting Job Data - Topcon DL-501 Instruction Manual

18.OUTPUTTING DATA

It is possible to output JOB and route data to a host computer or external memory device.

Bluetooth communication: "9.4 Outputting data using Bluetooth communication"
Communication cables: "24. OPTIONAL ACCESSORIES"
Output format and command operations: "Communication Manual"
• Communication setup can also be performed in <JOB menu> and <Route menu>.
18.1

Outputting JOB Data

• Only 1 JOB can be output at a time.
• JOB information, observation conditions, route information, observation data, start conditions,
foresight information and memo data are output.
PROCEDURE Outputting JOB data to host computer
1. Connect the DL and host computer.
2. Select "Management" in <Menu>.
3. Select "JOB" in <Management menu>.
4. Select "Comms output".
5. Select format from "CSV 1", "CSV 2" or
"SDR2X".
6. Check that "Com. locat." is set to "Com".
7. Press [OK].
• [COMM]: Press to display the communication
setup screen.

"19.3 Communication Setup"
M e n u
1 . M e a s
2 . M a n a g e m e n t
3 . C o n f i g
4 . C a l c u l a t i o n
M a n a g e m e n t m e n u
1 . J O B
2 . R o u t e
3 . K n o w n p o i n t d a t a
4 . S i m p l e m e a s . d a t a
J O B m e n u
1 . J O B s e t t i n g
2 . J O B d e l e t i o n
3 . C o m m s o u t p u t
4 . J O B b a c k u p
5 . J O B r e s t o r e
F o r m a t : C S V _ 1
C o m . l o c a t . : C o m
C O M M O K
89