4Wd Switch; 4Wd Switch; Calibration Switch; Calibration Switch - Kioti PX1002 Owner's Manual

4wD SwITCh

(1) 4wd switch

the 4wd (4 wheel driving) is to
increase traction by driving four
wheels. it is hydraulically operated
by a simple switch operation.
to engage the 4wd, press the switch
up. to disengage it, return the switch.
the 4wd function can be used un-
der the following conditions :
1. if high traction is needed in a hu-
mid area
2. when towing a trailer or using a
loader
TG110-AU-04.indd 29
3. when working on a sandy surface
4. when the tractor is pushed out by
reaction from the implement during
cultivating on a hard surface.
5. When cultivating a field or driving
over a bank
CAuTION
To avoid accident :
•
Engage the switch only when
A40O464A
the vehicle is stationary.
•
while the 4wD is engaged,
d r i v e t h e v e h ic l e wit h lo w
speed as steering and braking
characteristics may differ.
•
It is possible to engage the
4wD during driving. however,
you may hear noise or feel
slight shift impact some at
times in this case. For safe
driving, engage the 4wD when
the tractor is stationary.
•
The 4wD should not be used
on a paved road as tires can
b e w o r n f a s t e r a n d c o u l d
cause damage to front axle.
description oF operating systeM

CAlIbRATION SwITCh

(1) calibration switch

this switch is for calibration of shuttle
lever and clutch pedal. if any calibra-
tion is required please contact KIOTI
dealer at your convenience.
4
- 2
4
A40O463A
2013-03-06 오후 5:18:05