7
32
-
px7520 / px9020 / px1002
1. open the hood and check the air
cleaner housing for damage.
2. release the air cleaner clip and
remove the front cover.
3. clean the inside of the air cleaner
housing by blowing compressed
air through it.
4. replace the filter and check the
housing for damage.
5. Install the front cover and fix it with
the clip.
NOTE
•
when installing the cover, make
sure that the dust collection
valve is heading down.
TG110-AU-07.indd 32
CAUTION
•
Use only a genuine filter. Use
of a non-recommended filter
can cause damage to the en-
gine and sensor.
•
Make sure that no dust enters
the system by installing the
cover firmly.
•
When removing the filter, be
careful not to let foreign mate-
rial enter the air inlet.
ChECkING AIR CONDITIONER
hOsE(AG)
check the linkage and damage of
the air conditioner hose and pipe.
ChECkING CAB CUshION
RUBBER(Ah)
check the damage of the cab cush-
ion rubber.
REPLACING AIR FILTER(AI)
(1) Bolt
(2) filter
1. after loosening bolts from the left
and right side of the cabin roof and
separate the filter.
Tg1o753a
2013-03-15 오후 5:11:47