Setting And Operation Of Arcp-890 For Remote Control By Lan Connection; Pc Operating Environment; Installing Arcp-890; Settings For Connecting To Ts-890S - Kenwood TS-890S Setting Manual

to the operation manual of the TS-890S.

3.3. Setting and operation of ARCP-890 for remote control by LAN connection

3.3.1. PC operating environment

When operating remotely via LAN connection, the operating environment required for the PC
running ARCP-890 is as follows.
Operating System (OS)*
Processor
System Memory (RAM)
Free Hard Disk Space
Software
Peripheral Devices
* Applicable operating systems are subject to change without notice due to the end of the
technical support by Microsoft Corporation or change of the product specifications.

3.3.2. Installing ARCP-890

Download and install the ARCP-890 to the PC from the KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
For the installation method, refer to the guide on the download page.

3.3.3. Settings for connecting to TS-890S

Follow the procedure below to make settings for connecting to TS-890S.
Table 3.9 PC operating environment
Windows 10 (version 1703 (OS Build 15063.0) or later, 32-bit or
64-bit version)
Windows 8.1 (RTM or later, 32-bit or 64-bit version)
Windows 7 (Service Pack 1 or later, 32-bit or 64-bit version)
Faster than the recommended CPU for OS on which you are
operating
RAM having the System Memory recommended by the respective
OS used in your PC or larger
100 MB or more of free hard disk space
Microsoft .NET Framework 4.7 (including .NET Framework 4.0)
Displays with resolutions higher than SXGA (1280 x 1024)
Keyboard, mouse or other pointing devices
USB 2.0 port or RS-232C interface
Network function
Available networking environment (LAN or high-speed broadband)
12