45
Fig. 5.7: The connection list after adding the destination
If you modify, select the connection destination to be modified, click the "Edit" button, open
the "Edit LAN Connection" window again and modify it.
Select the PC's IP address at "PC IP Address". If there are multiple IP addresses on the PC to
be used, select the IP address to be used for connection with the TS-890S.
Clicking the "OK" button closes the "Configure LAN Connection" window and returns to the
"Setting" window in Figure 5.4.
Check the " Connect To" in the "Settings" window. If more than one connection destination
is registered, select from the drop-down list.
Click the "OK" button to close the "Settings" window.
5.3.4. Setting KNS
Follow the procedure below to configure the remote station user to connect to the TS-890S
via the ARHP-890 from the Internet.
When you select "Configure KNS" in "Tools" menu of ARHP-890, "Configure KNS" window
opens.