Kenwood TS-890S Setting Manual page 58

This setting depends on the call method of the broadband router manufacturer, and may be
"Port forwarding", "IP masquerade", "Port conversion", "NAT address conversion", etc. Refer
to the user manual for the broadband router used.
● Settings for the broadband router at the host station
Set the following to the host station's broadband router.
Port forwarding for control data
Item(Example)
Open IP address
Protocol
Port Number
Direction
Port forwarding for audio data
Item(Example)
Open IP address
Protocol
Port Number
Direction
● Settings for the broadband router at the remote station
Set the following to the remote station's broadband router.
Port forwarding for control data
Item(Example)
Open IP address
Protocol
Port Number
Direction
If you use ARVP-10 for VoIP software, you do not need to configure port forwarding
for audio data.
Caution:
For the broadband router settings, refer to the broadband router user manual.

Setting Details
IP address of the Host PC
TCP
50000(Default)
Two-way
Setting Details
IP address of the Host PC
UDP
33550(Default)
Two-way
Setting Details
IP address of the PC running ARCP-890
TCP
50000(Default)
Two-way
58