Installing Arcp-890; Settings For Connecting To Ts-890S - Kenwood TS-890S Setting Manual

Peripheral Devices
* Applicable operating systems are subject to change without notice due to the end of the
technical support by Microsoft Corporation or change of the product specifications.

5.4.2. Installing ARCP-890

Download and install the ARCP-890 to the PC from the KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
For the installation method, refer to the guide on the download page.

5.4.3. Settings for connecting to TS-890S

Follow the procedure below to make settings for connecting to TS-890S.
After starting the ARCP-890, select "Settings" in the "Tool" menu, then the "Settings"
window opens.
Tips:
When ARCP-890 is started for the first time, "Initial setting" window opens automatically,
you can make settings to connect to TS-890S in this window. The setting items are the same
as those in the "Settings" window.
Displays with resolutions higher than SXGA (1280 x 1024)
Keyboard, mouse or other pointing devices
USB 2.0 port or RS-232C interface
Network function
Available networking environment (LAN or high-speed broadband)
Sound function and audio input/output device
50