Connection And Disconnection To Ts-890S - Kenwood TS-890S Setting Manual

48
Finally clicking the "OK" button closes the "Edit KNS User" window and returns to the
"Configure KNS User" window.
Make sure that the edited information has been added to the list.
Fig. 5.11: The KNS user list after adding user
If you modify, select the user to be modified, click the "Edit" button, open the " Edit KNS
User" window again and modify it.
Click the "OK" button to close the "Configure KNS User" window and return to the "Configure
KNS" window.

5.3.5. Connection and disconnection to TS-890S

When you click the "Connect" button in the main window of ARHP-890, the indicator will
light green and the ARHP-890 connects to TS-890S and starts communication. You can
disconnect by clicking the "Connect" button during connection.
Tips:
Depending on the OS used on the PC, clicking the "Connect" button may open the "Windows
Security Alert" window. Click "Allow access" to advance the setting.
(For details on this window display, see chapter "5.7.1. Windows Firewall Settings")