Kenwood TS-890S Setting Manual page 46

46
Fig. 5.8: "Configure KNS" window
Select the PC's IP address at "PC IP Address". If there are multiple IP addresses on the PC to
be used, select the IP address to be used for connection with the broadband router.
For "Port No. for PC command", set the port number used for PC command communication.
Normally, please use the default value.
For "Session time", set the maximum connection time for remote operation.
In "VoIP" setting, select "Not use VoIP" because built-in VoIP is not used when using
ARVP-10.
Click the "Configure KNS User" button to register the user accessing TS-890S from a remote
station. The "Configure KNS User" window opens.