Programming The Smc-33 Remote Control Speaker Microphone - Kenwood TH-28A Instruction Manual

3 Programming SMC-33 the Remote
Control Speaker Microphone
Earphone jack
LOCK switch
These keys function just like the VFO, MR, and
CALL keys on the front panel of the transceiver. To
reset the function of the transceiver keys.
1
2
Connect the SMC-33 to the MIC jack on top of the
transceiver.
Press and hold Microphone key 1 (or 2 or 3) and
turn the power on. The programmable function (PF)
indicator appears for 10 seconds.
Press a key on the transceiver - or press F anda
key - to assign that key's function to key 1 (or 2 or
3) on the SMC-33. The possible functions for the
SMC-33 keys 1, 2, and 3 are listed on the next page.
For example, press the BAND key on the transceiver
to make key 1 on the SMC-33 function as the BAND
key. Press the F key, then the CALL key to make
key 1 function as the VFO/MEMORY/CALL scan key.
Turn the LOCK switch on to disable microphone
keys 1, 2, and 3.
You can use the SMC-33 with models that have no
remote function for simple transmit and receive
functions. No remote functions will be possible.
Make sure the LOCK switch on the back of the
microphone is on before using it with such models.
57