Connection And Disconnection To Ts-890S; Checking Modulation Line - Kenwood TS-890S Setting Manual

is registered, select from the drop-down list.
Click the "OK" button to close the "Settings" window.

5.4.4. Connection and disconnection to TS-890S

When you click the "Connect" button in the main window of ARCP-890, the indicator will light
green and communication with the TS-890S will start. You can disconnect by clicking the
"Connect" button during connection.
Tips:
Depending on the OS used on the PC, clicking the "Connect" button may open the "Windows
Security Alert" window. Click "Allow access" to advance the setting.
(For details on this window display, see chapter "5.7.1. Windows Firewall Settings")

5.4.5. Checking modulation line

Connect to TS-890S and select "Select modulation line" in the "TX/RX" menu of ARCP-890.
The "Select Modulation Line" window opens.
Fig. 5.16: "Select Modulation Line" window
54