Sony PMW-200 Service Manual page 53

8. Disconnect the DCP-56 board from the connector CN201 on the AU-342 board.
HN-384 board
Radiation sheet position
Note
If the radiation sheet has peeled off, attach a new one referring to the figure.
9. Remove the four tapes, cushion main C, and cushion main A.
Cushion main A
DCP-56 board
10. Install the removed parts by reversing steps of removal.
PMW-200/PMW-EX280
HN-387 board Harness
CN201
(AU-342 board)
CN2402
DCP-56 board
Main heat spreader DCP
Cushion main C
Fine-wire coaxial Fine-wire coaxial
cable (B) cable (R)
CN005
CN003
Fine-wire coaxial cable
CN001
(G)
CN2301
CN2300
Precision screws
(M2 x 4)
Tapes
DCP-56 board
Precision screws
(M2 x 4)
Precision screws
(M2 x 4)
2-23