Det-55 Board - Sony PMW-200 Service Manual
Solid-state memory camcorder
Hide thumbs
Also See for PMW-200:
- Operating instructions manual (141 pages) ,
- Service manual (23 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
3.
Remove the two precision screws (M2 x 4) and the two precision screws (M2.6 x 5) to detach the LCD
assembly.
KSW-62 board
CN402
4.
Install the removed parts by reversing steps of removal.
2-13-6.
DET-55 Board
Preparation
1.
Remove the handle (upper) case assembly. (Refer to
2.
Remove the control panel assembly. (Refer to
3.
Remove the LCD assembly. (Refer to
Procedure
1.
Remove the two precision screws (M2 x 5) and the two claws to detach the panel hinge cabinet T and the panel
hinge cabinet B.
2.
Disconnect the harness from the connector CN100 on the DET-55 board.
PMW-200/PMW-EX280
CN403
Harnesses
Precision screws
(M2 x 4)
"2-13-2. Control Switch Block
"2-13-3. MIC
"2-13-5. LCD
Assembly".)
Tape(BT)
Precision screws
(M2.6 x 5)
LCD assembly
(GZ92000)".)
Unit".)
2-29
Advertisement
Table of Contents
