Rear Panel Assembly - Sony PMW-200 Service Manual

2-9.

Rear Panel Assembly

Preparation
1. Remove the battery lid. (Refer to
2. Remove the bottom cover. (Refer to
3. Remove the inside panel assembly. (Refer to
4. Remove the outside panel assembly. (Refer to
5. Remove the top panel assembly. (Refer to
6. Remove the SxS slot assembly. (Refer to
Procedure
1. Detach the cap from the connector.
Caps
2. Remove the (a) precision screw (M2 x 5) to detach the USB cap.
3. Remove the four (b) precision screws (M2 x 5) to detach the rear panel assembly.
Rear panel assembly
(b) Precision screws
(M2 x 5)
USB cap
(a) Precision screw
(M2 x 5)
(b) Precision screws
(M2 x 5)
4. Install the removed parts by reversing steps of removal.
PMW-200/PMW-EX280
"2-2. Lithium Battery".)
"2-3. Bottom Cover and Tripod
"2-4-1. Inside Panel
"2-5-1. Outside Panel
"2-6. Top Panel Assembly".)
"2-7-1. SxS Slot Assembly".)
Washer".)
Assembly".)
Assembly".)
2-18